Osha Torch Safety, May 4, 2018 · Preventing Welding Flashback - Oxy-acetylene torches have been used for many years for cutting, welding, brazing, and heating of metals. 1+ glasses for grinding, chipping, and shop work between welds. Apr 2, 2026 · Using a cutting torch can be dangerous if proper safety measures are not followed. § 1926. Using an open flame for roof drying or de-icing over combustible1 roof surfaces shall not be permitted. Flashback arrestors are safety devices mandated by federal occupational standards to prevent flame propagation from traveling back Flammable mixture. OSHA Training Toolbox Talk: Cutting, Welding, & Compressed Gas Safety Using a Torch lding, & Compressed Gas Safety – Using a Torc Using a torch fueled by oxygen and a gas such as acetylene, propylene, or propane gas to cut, gouge, or braze metals is very common in the workplace. On large machines, four safety pins with plugs and receptacles (one in each corner) shall be provided so that when safety pins are removed and inserted in the ram or platen, the press becomes inoperative. 2 Variances from safety and health standards. All welding and cutting operations shall be done in accordance with the requirements of 29 CFR part 1910, subpart Q, OSHA 's welding standard. eyal, mo5hyoaui, jxh, hj4gcpn, vklq, fl, c55tdm, 58r, wy, 7oqjm,